c
2017 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2
MODEL
DRCR
3-way, direct-acting, directional valve with drain to port 4 (3 to 4 open, port 2
blocked)
SERIES 2 / CAPACITY: 60 L/min. / CAVITY: T-22A
(L)CONTROL
L Standard Screw Adjustment
C Concealed Manual Override
K Handknob
(N)ADJUSTMENT RANGE
N 60 - 800 psi (4 - 55 bar), 200 psi (14
bar) Standard Setting
E 200 - 400 psi (14 - 28 bar), 200 psi (14
bar) Standard Setting
S 25 - 200 psi (1,7 - 14 bar), 200 psi (14
bar) Standard Setting
(N)SEAL MATERIAL
N Buna-N
V Viton
MATERIAL/COATING
Standard Material/Coating
/LH Mild Steel, Zinc-Nickel
NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.
Direct-acting, 3-way directional cartridges (3 to 4 open, 2 blocked) are switching devices typically used in moderate
flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logic
cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
TECHNICAL DATA
Cavity T-22A
Series 2
Capacity 60 L/min.
Maximum Operating Pressure 350 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 50 cc/min.@210 bar
Adjustment - No. of CW Turns from Min. to Max. Setting 5
Valve Hex Size 28,6 mm
Valve Installation Torque 61 - 68 Nm
Locknut Hex Size 15 mm
Locknut Torque 9 - 10 Nm
Seal kit - Cartridge Buna: 990022007
Seal kit - Cartridge Polyurethane: 990022002
Seal kit - Cartridge Viton: 990022006
Model Weight 0.33 kg.
snhy.com/
DRCR
Model Code Example: DRCRLNNCONFIGURATION OPTIONS
c
2017 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 2
TECHNICAL FEATURES
Note: 800 psi (55 bar) is the highest setting possible with this valve.
Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel
components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of
Construction page located under TECH RESOURCES.
The flow path between port 2 and port 3 is bidirectional.
Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
This valve is not bistable; it is capable of modulating between the two positions shown.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
machining variations.
PERFORMANCE CURVES
